Skip to content
Postmates Home
Location markerEnter delivery addressChevron down small

Duraflame Retro Edition 4 Hour Fire Log

$8.20
6 lbs
You must be 21 or older.
Details

Designed for indoor, open-hearth fireplaces, Duraflame Retro Edition 4 Hour Fire Logs provide a convenient and authentic fire experience that lights quickly, usually in less than five minutes. Once lit, they are engineered to burn for up to four hours. However, the actual duration of the burn can vary based on fireplace design and climatic conditions. Each log has an approximate heat content of 78,000 BTU. These fire logs are recognized for being cleaner burning than traditional wood. They emit 80% fewer fine particles, 75% less carbon monoxide, and 90% fewer hazardous air pollutants, making them a more environmentally friendly choice. The logs are UL listed as processed solid fuel and are appropriate for use in listed factory-built fireplaces. When used in a properly functioning and maintained fireplace and chimney, venting of emissions should occur outdoors without concern of by-products entering the home. Emphasizing sustainability, Duraflame Retro Edition 4 Hour Fire Logs consume significantly less material than a wood fire of comparable duration, thus reducing the number of trees harvested for firewood. These logs are produced using a mix of recycled and renewable wood sawdust, agricultural fibers, wax, and other combustible materials, aligning with efforts to conserve natural resources. They are manufactured in the USA. • Brand: Duraflame • Duraflame, Inc., Stockton,CA,95203 • Packaging: Reusable

Show more

Directions

Directions for use: Directions: Read instructions before use. Duraflame firelogs may be burned in all types of indoor, open-hearth fireplaces. They are designed to light fast and burn up to 4 hours when used according to instructions. Variations in fireplace and climatic conditions may alter duration of burn. Heat content is approximately 78,000 BTU. IF used in an outdoor fireplace / fire pit, use only in a well-ventilated area, and not under any form of cover. Weather conditions and wind may cause the log to produce more smoke and burn for a shorter duration. Lighting Instructions: 1: Carefully pull outward on the seam of the wrapper (without tearing) to loosen it from the log and create an air space. 2: Place firelog (only one) on supporting grate with arrows pointing down and seam facing room. 3: Light the seam below each arrow. Close fireplace screen. Storage recommendation: Store out of reach from children and pets

Show more

The information shown here may not be current, complete, or accurate. Always check the item's packaging for product information and warnings.